Some of the industrial washing machine motors used in the laundry room are burnt out. How can we avoid this situation? The following industrial washing machine manufacturers will talk about it for you. 1. First of all, we must ensure the cleanliness of the motor of the industrial washing machine. When the industrial washing machine is running, there should be no dust, water stains and other kinds of sundries within 3M around the air inlet of the motor. In this way, these impurities are inhaled into the motor of the industrial washing machine to form a short-circuit medium, which will damage the insulation layer of the wire in the motor, cause short circuit and burn the motor. 2. Do not overload the industrial washing machine. If the industrial washing machine is overloaded, the motor of the industrial washing machine will be overloaded and the voltage will be too low. If the motor overload time of the industrial washing machine is too long, the motor will absorb a lot of active power from the grid, so the motor current of the industrial washing machine will increase rapidly, and the temperature will also rise. The high temperature will aging the insulation layer of the motor and eventually burn the motor. 3. In order to ensure that the temperature of the motor of the industrial washing machine is in a reasonable range, for the motor bearing, stator and shell and other parts, whether there is abnormal temperature change, especially for the industrial washing machine motor without voltage, current and overload protection, it is very important to detect the temperature rise better. If the temperature rise of the industrial washing machine motor is too high, the motor will burn Destruction. 4. It is necessary to check whether the three-phase current of the motor of the industrial washing machine is balanced. Only when the difference between the current of any one phase and that of the other two phases does not exceed 10%, the motor of the industrial washing machine can operate in a safe direction without burning.